CÔNG TY TNHH VALQUA VIỆT NAM

Dây Tết Chèn Mặt Cắt Chữ V (V-Packing)

Phốt thủy lực chữ V nhiều tầng (VALQUA No. 7330CV(Dynamic application))
Phốt thủy lực chữ V nhiều tầng (VALQUA No. 7330CV(Dynamic application))

VALQUA NHẬT BẢN - CHẤT LƯỢNG CHÍNH HÃNG: Sản phẩm Phốt thủy lực chữ V nhiều tầng (VALQUA No. 7330CV(Dynamic application)) chính hãng từ Tập đoàn VALQUA Nhật Bản, chuyên dụng cho các giải pháp làm kín khắt khe trong ngành công nghiệp hóa chất, dầu khí, nhiệt điện và chế tạo máy.

Đặc Tính Nổi Bật & Ưu Điểm:

  • This is VALFLON V-Packing and used by laminating 3 layers or more.
  • Create a structure to constantly have the spring hold the packing at installation.
Môi Chất Làm Việc Phù Hợp:

Nước công nghiệp, hơi nước nóng, dầu bôi trơn, khí gas, dung môi và các loại hóa chất thông dụng trong nhà máy.

Môi Chất Không Khuyến Nghị:

Không dùng cho chất oxy hóa cực mạnh hoặc điều kiện vượt quá thông số kỹ thuật tiêu chuẩn của nhà sản xuất.

Ứng Dụng Tiêu Biểu Trong Nhà Máy:

It is mainly used as a seal for high-speed and high-pressure, such as water jets and plunger pumps.

■ Product content and main applications

Product content
VALFLON-processed carbon cloth is laminated and molded into a ring shape with a V-shaped cross section.
Main applications
It is mainly used as a seal for high-speed and high-pressure, such as water jets and plunger pumps.

■ Service temperature range

Rubber material Service temperature range
Carbon cloth and VALFLON -30℃ ~ 150℃

■ Operating pressure, pressure direction and pressure types

Pressure Pressure (with back-up ring) Pressure direction
L:up to 2MPa M:2 to 7Mpa N:7 to 30MPa - One-side pressure
-

Pressure types
shock, surge, pulse, vacuum
-

■ Motions and strokes applied

For fixing -
Reciprocating ○
Rotating ×
Helical ×
Opening and shutting ×
Sliding ×
Oscillating ×
Stroking
-

■ Fluid, speed and PV value

Liquid ○
Gas ×
Fine particle ×
General dust -
Oil film -
Speed
-
PV Value
-

■ Lubrication, mountability, sliding resistance, compression resistance, eccentricity/inclination, conformance

Lubrication
Needed
Mountability
Good
Sliding resistance
and compression resistance
Low
Eccentricity/inclination
and conformance
Low

*Usable even in poor lubrication condition (However, PTFE for non-lubrication must be used.)

■ Cross-section dimensions and design precautions

・Cross-section dimensions


・Design precautions

■ Case examples of defects and countermeasures

■ FAQ